Bag Maintenance Instruction

Cleaning, Install or Replacement instructions

Removal Instructions

1. Unlatch & Open top door (bottom door hold dirt & debris)
2. Filter bag is seated into a built in retainer ring. Gently pull edges of bag towards center, push down and slide the bag out of the slotted ring.
3. To install or clean the bag unzip and remove the flexible band and wash or replace fabric bag.  The flexible metal band is reuseable, do not discard.

Installation Instructions

1. Start at the back of the slotted black retainer ring and slide the filter bag into place.  The bag must fit into the slotted ring and above the built in plastic grate.
2. Adjust the edges of the bag to insure a snug fit into the ring. Gently pull the material up from the center.
3. Close & Latch Door.